KX-55
About the Product
ISIJET KX type space heaters are the systems that use diesel fuel and work very efficiently, as they dissipate the exhaust gas to the environment to be heated after the combustion operation. KX type heaters do not need any installation before use. The only operation to be done is to fill the fuel tank and to plug the heater to the electricity before usage. The electronic ignition, the optional thermostat property and the photocell sensor that controls flame, make KX type heaters as fully automatic and user friendly systems. Since exhaust gases are emitted to the environment the KX type heaters shall only be used in open areas or well ventilated places.
MODEL |
CAPACITY |
FLOW m³/h |
FUEL CONSUMPTION KG/H |
MOTOR KW |
VOLT FREQUENCY |
DIMENTIONS MM |
WEIGHT KG |
TANK CAPACITY LT |
|
KCAL/H |
KW |
||||||||
KX 35 |
35000 |
41 |
1350 |
3.5 |
0.2 |
220 V 50 HZ |
590x1180x760 |
50 |
65 |
KX-40 |
40000 |
46.5 |
1500 |
4.1 |
0.2 |
220 V 50 HZ |
590x1200x650 |
45 |
65 |
KX 55 |
55000 |
64 |
1900 |
5.2 |
0.2 |
220 V 50 HZ |
590x1230x760 |
56 |
65 |
KX 90 |
90000 |
104.7 |
4150 |
8.7 |
0.75 |
220 V 50 HZ |
600x1570x950 |
90 |
115 |
Properties
- Thermal protection
- Electronic flame control with photocell
- Stainless steel combustion chambers
- Strong and durable body
- Long life fuel pump
- Cleanable, transparent fuel filter
- Portable by means of rubber tires
- Fuel tank with fuel level indicator
- Optional room thermostat connection
- High air blowing capacity
- Electrostatic powder paint durable to external factors
Area of Usage
- Construction sites
- At any kind of concrete molds to avoid concrete freezing
- Accelerate concrete hardening in tunnel molds
- Automobile services and maintenance shops
- Aircraft and helicopter hangars